Packet radio sends data over the air using the AX.25 protocol. APRS (the Automatic Packet Reporting System) builds on it to share positions, weather, messages and telemetry. A TNC (terminal node controller) is the modem between the radio and your software. These days it’s usually software using a sound card.
Dire Wolf
Project: github.com/wb2osz/direwolf · Installed from: built from source
Dire Wolf is a software TNC. It decodes and encodes AX.25 packets through a sound card, and it can act as an APRS digipeater, an internet gateway (iGate), a beacon, and a tracker. Other applications connect to it over its KISS and AGW network interfaces. Many of the programs on this page are designed to work with Dire Wolf.
HamPack places a starter configuration file in its state directory to get you going.
Graywolf
Project: github.com/chrissnell/graywolf · Installed from: built from source
Graywolf is an APRS transceiver and gateway: modem, digipeater and iGate in one program, set up and monitored through a web interface. HamPack installs it as a systemd service that starts with the system.
Its web UI is at http://localhost:8080, and by default only the machine it
runs on can reach it. To open it to other machines, override the service’s
ExecStart with -http 0.0.0.0:8080:
sudo systemctl edit graywolf
Changes made this way survive HamPack updates. Edits to
/etc/systemd/system/graywolf.service itself don’t.
YAAC
Project: ka2ddo.org · Installed from: download from the project site
YAAC (“Yet Another APRS Client”) is a full-featured, Java-based APRS client. It shows stations on maps (including offline OpenStreetMap tiles), handles messaging, bulletins and objects, and can act as a digipeater or iGate. It works with Dire Wolf, hardware TNCs and APRS-IS.
QtTermTCP
Project: github.com/g8bpq/QtTermTCP · Installed from: built from source
QtTermTCP is a packet radio terminal from John Wiseman, G8BPQ, the author of the BPQ32/LinBPQ node software. Use it to connect to BPQ nodes over the network, or straight over the air through KISS and AGW TNCs such as Dire Wolf.
Paracon
Project: github.com/mfncooper/paracon · Installed from: pre-built release
Paracon is a simple, friendly packet radio terminal. It connects to any AGWPE-compatible TNC, such as Dire Wolf, and supports several connected sessions at once along with an unproto (monitor and broadcast) window.
chattervox
Project: github.com/brannondorsey/chattervox · Installed from: AUR
chattervox is a command-line chat room over AX.25 packet. Messages are digitally signed so recipients can verify who sent them (and are not encrypted, as amateur radio rules require). It uses a KISS TNC such as Dire Wolf.